| specifications |
rated
outputpower
(both channels driven) |
60
W per channel into rated load impedance (8 W)
95 W into 4 W and 130 W into 2 W for short periods |
typical
outputpower
(both channels driven) |
72
W per channel into rated load impedance (8 W)
115 W into 4 W and 150 W into 2 W for short periods |
| preamplifier
input impedance |
30
kW nominal |
| preamplifier
input level |
175
mV rms
(relative to 0.5 V rms preamplifier output) |
| preamplifier
gain |
9
dB at 1 kHz |
| preamplifier
signal to noise |
greater
than 80 dB
(relative to 0.5 V rms preamplifier output) |
| preamplifier
output impedance |
100
W nominal |
| preamplifier
maximum output |
greater
than 7.76 V rms |
| record
output impedance |
1
kW nominal |
| record
output gain |
0
db (i.e. the record output level is the same as the input level) |
| power
amplifier input impedance |
47
kW nominal |
| power
amplifier input level |
782
mV rms (for full rated output) |
| power
amplifier gain |
29.0
dB at 1 kHz |
| power
amplifier signal to noise |
greater
than 80 dB (relative to 0 dBW) |
| frequency
response (-3 dB) |
1
Hz - 65 kHz |
| frequency
response (20 Hz - 20 kHz) |
±
0.5 dB |
| total
harmonic distortion + noise |
less
than 0.07% |
| channel
separation |
greater
than 60 dB at 1 kHz |
| crosstalk
rejection |
greater
than 80 dB at 1 kHz |
| polarity(phase) |
non-inverting
for all inputs and outputs |
| headphone
output impedance |
330
W (suitable for headphones of 8 W to 2 kW impedance) |
| operating
temperature range |
10
- 35oC |
| ac
supply frequency |
50
- 60 Hz |
| ac
supply voltage |
110
-120 V or 220 - 240 V
The voltage is marked on the rear of the unit |
| power
consumption |
less
than 300 W |
dimensions
(including feet,
terminals and controls) |
445
mm wide
75 mm high
350 mm deep |
통신판매업신고번호 제 2003-광진00391호
주요특징
